Skip to content
plugboard.appRequest a demo

Q-SYS

Room system monitoring.

All three are live:

  • Read AV equipment and room health
  • Read network equipment
  • Read network sites

Enable network monitoring and configure the connector in the existing integration settings. It needs a site connector agent, or an explicitly authorised local deployment, with access to the AV management network. Enable QRC on TCP 1710 and configure a QRC user where authentication is enabled. Expose named standard status controls in Q-SYS Designer for room-level health.

Monitoring is read-only. Offline, unsupported, stale and unknown observations remain distinct. Live hardware/account pilot validation is still required. Up to 64 explicitly configured endpoints share protocol credentials and port. Each endpoint can be mapped to a campus; there is one site agent binding per connector. Core StatusGet and named Control.Get only. Additional Cores report Core health; named room controls are read from the primary Core. No gain, mute, power or other control commands are sent.

  • An enabled connector, a compatible vendor service and appropriate Plugboard permissions. Live handlers require real configuration and provider access.
  • Provider credentials and permissions must be configured by the school’s administrator. Never paste credentials into documentation.
  • A hosted deployment needs a connector agent on the school network; a self-hosted deployment needs authorised network reachability.

This is a source capability reference, not evidence of a successful connection to your vendor account. Check the connector and version available in your deployment.

For an available connector, open Settings, Connectors and check its configuration fields, requirements and permissions. Use Test connection before relying on synced records.

See connector configuration for shared setup concepts and the capability reference for reviewed support and limitations.

Last updated